Laser Machine

ENSIS AJ SERIES
FULLY FEATURED FIBRE LASERS PROCESSING THIN TO THICK MATERIALS WITH A SINGLE LENS UNIQUE BEAM CONTROL FOR HIGHER PRODUCTIVITY.
AMADA’S ORIGINAL VARIABLE BEAM CONTROL TECHNOLOGY IS NOW COMBINED WITH HIGHER POWER FIBRE LASER ENGINES Now utilising 3kW, 6kW and 9kW fibre laser engines, the ENSIS-AJ series machines significantly increase processing capabilities. 6kW and 9kW variants introduce AMADA’s Auto Collimation system, to provide unrivalled beam spot control. Linked with AMADA’s Variable Beam Control technology, this allows very high speed piercing, fast cutting rates and vastly improved bevel angles on thicker materials. Utilising a single lens for the entire range of materials and thicknesses reduces machine setup and avoids potential mistakes, providing higher productivity and therefore higher profitability. A high capacity automatic nozzle changer and the simple, intuitive AMNC 3i numerical control are further features ensuring machine setup is reduced to a minimum.

ENSIS 3015AJ

ENSIS TECHNOLOGY

1. Cutting on thin to thick materials using unique optimum beam control

2. Efficiency improvement by energy saving effect

3. Remarkably small footprint by oscillator downsizing and built in the machine

4. AMNC 3i Controller : The latest NC unit AMNC 3i can be operated quickly and intuitively like a smartphone. A large screen provides good visibility and can display many functions and information items.


KEY EVOLUTION FACTORS

1.Addition of collimation system expands ENSIS cut quality and capabilities.

2.Now in 6kW and 9kw

3.Collimation mechanism does not limit access to cutting lens or head maintenance.

4.Infinite mode and diameter control combination is an industry first.

5.1-second clean pierce in 1″ plate

6.Up to a 66% reduction in process time when compared to conventional fiber lasers at the same wattage

MACHINE SPECIFICATIONS
    UNIT ENSIS 3015 AJ
ENSIS 4020 AJ
Numerical Control   AMNC 3i
Controlled axes   X,Y,Z axes (three axes controlled simultanesouly) + B Axis
Axis travel distance X x Y x Z mm 3070 x 1550 x 100 4070 x 2050 x 100
Maximum processing dimension X x Y mm 3070 x 1550 4070 x 2050
Maximum simultaneous feed rate X/Y m/min 170
Repetable Positioning accuracy mm +/- 0.1
Maximum material mass kg 920 1570
Processing surface height mm 940
Machine mass kg 8000 12200

OCILLATOR SPECIFICATIONS
      ENSIS 3000
ENSIS 6000 ENSIS 9000
Beam generation   Laser diode-pumped fibre laser
Maximum Power W 3000
6000 9000
Wave Length µm 1.08
Maximum Processing Thickness Mild Steel mm 25 25 25
Stainless steel 15 25 25
Aluminium 12 25 25
Brass 8 15 18
Copper 6 12 12
Titanium 5 10 15
SHUTTLE SPECIFICATIONS
      LST-3015G
LST-4020G
Max Material Dimensions X x Y mm 3070 x 1550
4070 x 2050
Number of pallets   2
*Maximum Value depends on Material quality and enviromental conditions.