Punching Machine

EM-NT Series

EM 2510 NT
EM CONTROLLER

EM Controller

 

Specifications
Model EM2510NT EMZ3510NT EMZ-3610NT

EMK-3510NT

EMK-3610NT
Press Capacity kN {tonf} 200(20) 300(30) 300(30)
Press drive system AC Servo direct twin drive AC Servo direct twin drive AC Servo direct twin drive
Stroke length mm 37 37 37
Maximum material thickness mm 3.2(brush table) 3.2(brush table) 3.2(brush table)
Axis travel mm 1270 x 2500 1270 x 2500 1525 x 2500 1270 x 2500 1525 x 2500
Axis speed X.Y m/min X100, Y80 X100, Y80 X100, Y80 X100, Y80
Hit rate min-1 {hpm} 500 (5mm stroke, 25.4mm pitch) 500 (5mm stroke, 25.4mm pitch) 500 (5mm stroke, 25.4mm pitch)
Hit Rate min-1 {hpm} 780 (5mm stroke, 1.0mm pitch) 780 (5mm stroke, 1.0mm pitch) 780 (5mm stroke, 1.0mm pitch)
Hit Rate min-1 {hpm} 1800 (1.4mm stroke, 0.5mm pitch) 1800 (1.4mm stroke, 0.5mm pitch) 1800 (1.4mm stroke, 0.5mm pitch)
Punching Accuracy mm ± 0.1 (Mild mode ± 0.07) ± 0.1 (Mild mode ± 0.07) ± 0.1 (Mild mode ± 0.07)
Maximum punch size Ø 114.3 114.3 114.3
Turret Capacity 45 stn (4 Auto index) 45 stn (4 Auto index) 58 stn (4 Auto index)
EM SPECIAL TOOLS

MARKING TOOL

MARKING TOOL

DEBURRING TOOL

DEBURRING TOOL

WORK CHUTE TOOL

WORK CHUTE TOOL

INCH BEND TOOL

INCH BEND TOOL

CONTOURING TOOL

CONTOURING TOOL